Selective Soldering Series / Benchtop Type
Retrofit process automation machine with a point flow soldering
Realizes improvement of soldering quality and reduction of defective rate
Can be replaced with hand-soldering processes caused by labor shortage
ULTIMA Series
Benchtop Selective Soldering Series (CE mark Acquired)
Benchtop Selective Soldering Machine, “ULTIMA-TRZ (CE)”
The CE-certified ULTIMA-TRZ incorporates the below CE standard features
Solder Shortage Alarm, Weekly Timer, Laser-type Wave Height Detection System, Solder Overheat/N2 Overheat Sensor, Three-light Signal Tower, Box-type Safety Cover, Area Sensor
Benchtop Selective Fluxing Machine, “ULTIMA-SPZ (CE)”
The CE-certified ULTIMA-SPZ incorporates the below CE standard features
PCB Presence Sensor, Three-light Signal Tower, Liquid Flowmeter, Safety Cover
Benchtop Preheating Machine, “ULTIMA-PHS (CE)”
CE-certified ULTIMA-PHS-430A
ULTIMA-TRZ
Benchtop Selective Soldering Machine,”“TakuROBO”®
Realizes hand-soldering with various modes and quality improvement of laser soldering
Enables high-mix small lot production with easy operation and program creation
Compact unit with freely adjustable layout. Low pricing for easier initial investment
| Outer Dimensions | 620(W) x 940(D) x 442(H) mm |
|---|---|
| Applicable PCB Size | X50 x Y50 – X330 x Y250 (mm) |
| Machine Weight | Approx. 120 kg |
| Power Source | Single-phase AC200 ± 10% V 4 kVA |
| Nitrogen (99.99% purity or more) | 0.4 – 0.5 MPa 25 L/min |
| Solder Pot | Approx. 16 kg |
| Operation | PCB stage (XYZ) drive |
ULTIMA-SPZ
Benchtop Selective Spray Fluxer,“SpROBO”®
Realizes highly efficient flux application under optimal conditions
Enables high-mix small lot production with easy operation and program creation
Two types of nozzles (two-fluids and aerojet) are selectable for flux application
Easy numerical management with the digital flow display
Improved maintainability
| Outer Dimensions | 630(W) x 910(D) x 390(H) mm |
|---|---|
| Applicable PCB Size | X50 x Y50 – X330 x Y250 (mm) |
| Machine Weight | Approx. 60 kg |
| Power Source | Single-phase AC100 – 240 ± 10% V 0.2 kVA |
| Air | 0.4 – 0.5 MPa |
| Fluxer | Two-fluids nozzle / Aerojet nozzle |
| Flux Tank Capacity | 0.3 – 0.4 L (maximum) |
| Operation | Spray gun (XY) drive |
ULTIMA-PHS-430A
Benchtop Preheating Machine
Easy operation
Assists preheating of a PCB
Reduces soldering time and improves soldering quality
| Outer Dimensions | 690(W) x 602(D) x 682(H) mm |
|---|---|
| Applicable PCB Size | X50 x Y50 – X330 x Y250 (mm) |
| Machine Weight | Approx. 45 kg |
| Power Source | Single-phase AC200 ± 10% V 2.4 kVA |
